Dust blowing from vents right after cleaning
We scrub the duct walls with rotary brushes under negative pressure, then sanitize. The dust source is removed, not just filtered. Most customers see the difference within 24 hours.
If your vents are blowing dust and your energy bills keep climbing, air duct cleaning Hunters creek FL is the fix. Our techs pull years of dust, pollen and mold out of your ductwork, seal leaks, and restore real airflow. We serve Orange County homes and businesses with same-day appointments and honest pricing. Call (844) 796-4282 and breathe easier tonight.

Air duct cleaning Hunters creek FL is the full mechanical scrubbing of your home's supply and return ductwork, using negative-pressure vacuums and rotary brushes to pull out dust, dander, pollen, construction debris and mold spores. We hook a duct cleaning machine to the main trunk line, seal every register, then work each branch back to the plenum. A typical 2,000 sq ft home takes three to four hours. We finish by fogging the system with an EPA-registered sanitizer and swapping your air filters.
Hunters creek sits in Orange County, where humidity hovers above 70% for most of the year. That moisture feeds mold inside cool metal ducts, and the pollen from nearby oaks and pines piles up fast. If you have noticed musty smells, dust settling an hour after you clean, or a clogged air filter every month, you need ductwork cleaning Hunters creek homeowners schedule before allergy season peaks. We also handle air duct cleaning near Hunters creek for condos, offices and short-term rentals.
Every job is quoted flat-rate and includes the full scope below. We do not charge extra for the inspection, the sanitizer, or the filter swap. If we find something outside the standard scope, we tell you the price before we touch it.
We clean every supply register, every return, the main trunk line and the plenum. No shortcuts where the vacuum cannot reach. Rotary brushes and air whips handle the branch lines.
Before we start, we run a camera through the main trunk and capture photos. You see the actual condition of your ducts, not a sales pitch. We email the images after the job.
After scrubbing, we fog the duct interior with an EPA-registered sanitizer that kills mold, mildew and bacteria. This is included, not an add-on. It leaves a light, clean scent that fades within a day.
We seal accessible leaks at joints, boots and plenum connections with mastic and foil tape rated for Florida attic temperatures. This is where most of your airflow gains come from.
We swap your air filters with the correct size and MERV rating for your system. If you have a washable filter, we clean it and show you how to maintain it between visits.
We walk the house, open every register, and inspect the plenum and main trunk with a borescope camera. You see the photos before we start. The written quote matches the final invoice, no surprises. This takes 20-30 minutes and costs nothing.
We connect a negative-pressure vacuum to the main trunk and seal every supply and return register with foam blocks. This keeps dust from blowing back into your living space. We lay drop cloths on carpet and tile, and move furniture away from vents as needed.
Rotary brushes and air whips run through each branch line, loosening caked dust and debris. We work from the farthest register back to the plenum so nothing gets left behind. A typical 8-vent home takes about 90 minutes for this step.
We fog the duct interior with an EPA-registered sanitizer that kills mold, bacteria and mildew. Then we seal visible leaks at joints and boots with mastic and foil tape. This is where your airflow gains actually come from.
We replace your air filters, restart the system, and check static pressure at the return. You get before-and-after photos and a written summary. If anything looks off, we schedule a follow-up at no charge within 30 days.
Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.
Creates negative pressure in the duct system so debris is captured, not blown into your living space. HEPA filtration traps particles down to 0.3 microns.
Mechanical agitation for caked dust on duct walls. Brushes handle rigid metal, air whips handle flex duct without damage.
Lets us see inside the trunk and branch lines before and after cleaning. You get the photos, not just our word.
Used when we check system performance after cleaning. Verifies refrigerant charge and electrical draw are within spec.
For gas furnace systems, confirms safe combustion after we have changed airflow characteristics in the ducts.
Seals leaks at joints and boots. Foil tape rated for high attic temperatures holds up where standard duct tape fails.
Customer complained of a musty smell every time the upstairs AC kicked on. Borescope showed black mold growth on the return plenum liner and two crushed flex branch lines feeding the back bedrooms.
We scrubbed the plenum, sanitized the full system, and replaced the two crushed flex runs. Static pressure dropped from 0.82 to 0.58 inches of water column. The smell was gone the same day.
Homeowner finished a kitchen remodel and drywall dust was blowing out of every vent. Filters were clogging in under two weeks. The return plenum was coated in fine white dust.
Full mechanical scrub on all 11 vents, new filters, and a sanitizer fog. Airflow improved 25% based on static pressure readings. Dust stopped blowing within one cooling cycle.
Property manager needed six units cleaned between tenants. Two units had visible pet dander buildup and one had a clogged return that was starving the blower motor.
All six units cleaned in two days. The clogged return was cleared, and we flagged a failing blower motor in unit 4 that was replaced the same week. All units passed inspection.
Most duct issues announce themselves long before the system quits. Here are the ones we see most often in Hunters creek, and what happens if you let them ride.
Ask a pro →We scrub the duct walls with rotary brushes under negative pressure, then sanitize. The dust source is removed, not just filtered. Most customers see the difference within 24 hours.
We identify the moisture source, scrub the mold off the liner, and fog with an EPA-registered sanitizer. If the liner is too far gone, we quote replacement.
We pressure-test the trunk, find the leak or blockage, and seal or repair it. Airflow balances out and the system stops short-cycling.
We seal accessible leaks with mastic and foil tape, then verify static pressure. Most Hunters creek homes see a measurable drop in cooling cost the next billing cycle.
Most Hunters creek homes run $299 to $499 for a standard 8-vent system in 2026. Larger homes with two AC units or heavy mold growth can reach $700-$900. The price includes inspection, mechanical scrubbing, sanitizing, leak sealing and new filters. We quote flat-rate before we start, so the number you hear on the phone is the number on the invoice.
Every three to five years for most Hunters creek homes. If you have pets, allergies, or had recent remodeling, every two years is smarter. Orange County's humidity and pollen load push us toward the shorter end. If you see dust blowing from vents a week after cleaning, that is your signal to call sooner.
Yes. We cover all of Hunters creek and the surrounding Orange County area, including ZIP 32837. Same-day appointments are usually available if you call before noon. We also serve nearby neighborhoods like Westchase, Briar Forest and Memorial. Call (844) 796-4282 and we will confirm the next open slot.
Yes, measurably. Removing dust, mold spores and pollen from the duct interior cuts the particles your system recycles every hour. Most customers notice less dust on furniture and fewer allergy symptoms within a week. Pairing the cleaning with a fresh air filter and a smart thermostat schedule keeps the improvement going.
One call gets you a flat-rate quote, a same-day slot if you need it, and a crew that leaves your ducts cleaner than they have been in years. We are licensed, insured and backed by a 1-year workmanship warranty. Call (844) 796-4282 or book online.
Book My Cleaning (844) 796-4282 →Call (844) 796-4282 any time, day or night. A live dispatcher answers, takes your address and symptoms, and gives you an arrival window. For non-emergency work, we schedule same-day and next-day slots across Hunters creek and the surrounding neighborhoods, and we text you when the technician is on the way.